Pump-to-Tank Connection Kit (500mm)

The Tank Connector Kit fits seamlessly to your water tank to give you a pressurised water feed. It’s a convenient, easy-to-operate all-in-one water connection kit unit that provides a water feed that is sufficient for simultaneous use. The Tank Connector Kit is the only DIY solution you need to convert the water supply from your tank to a pressurised pumping solution. 70 percent – 90 percent of all pump problems originate from the inlet side of a pump, usually due to pipe size and distances. Very often, mistakes made with installation are not immediately evident as damage to the mechanical seal happens over a period of time depending on the severity of the installation fault as well as the running hours of the pump. This pump connection kit eliminates any possible mistakes that could be made upon installation, therefore eliminating any future problems. Although this kit should never be installed on a pump that has an inlet larger than 25mm, the large majority of pressure pumps have a 25mm inlet. Due to the kit being able to be installed by almost anyone, it eliminates the need for a qualified professional, therefore limiting the expenses associated with installation. The design of the kit also makes use of only the needed material, also limiting costs. Fits all tanks such as JOJO RotoTank and Econo… What’s in the box 1 x 500mm Yellow suction hose 1 x Camlock type c female coupler 1 x Pvc ball valve 25mm 1 x Reducing bush 1 x Barrel nipple 1 x Camlock type f male adaptor